Model :STA-1550S
The STA-1550S Simultaneous Thermal Analyser combines TGA with DSC/DTA for simultaneous mass-change and thermal-event analysis. It offers a temperature range up to 1250°C, 0.01 mg mass resolution, programmable heating and cooling, two-channel atmosphere control, and intelligent data analysis software.
Need Help with This Product?
The STA-1550S Simultaneous Thermal Analyser combines thermogravimetric analysis (TG/TGA) with differential thermal analysis (DTA) or differential scanning calorimetry (DSC). It measures mass changes and thermal events from the same sample in a single test.
With a temperature range from room temperature to 1250°C, the STA-1550S supports the study of thermal stability, decomposition, oxidation, adsorption, desorption, melting, crystallization, phase transitions and reaction heat.
The system features a high-precision balance, dual temperature sensors, programmable atmosphere control and flexible FTC/STC temperature control modes. Its 7-inch color touchscreen and analysis software simplify real-time monitoring, data processing and report generation.
The STA-1550S is suitable for:
Typical materials include plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, metals and composite materials.
What does the STA-1550S Simultaneous Thermal Analyser measure?
It combines TG/TGA with DTA or DSC to measure sample mass changes and thermal events during heating, cooling or isothermal testing.
What is the maximum temperature of the STA-1550S?
The instrument operates from room temperature up to 1250°C, with a temperature resolution of 0.01°C.
What is the mass resolution of the STA-1550S?
The balance has a measurement range of 0.01 mg to 5 g and a mass resolution of 0.01 mg.
Can the STA-1550S control the test atmosphere?
Yes. It supports two independent atmosphere channels and can automatically switch between them according to software settings.
| Model | STA-1550S |
| temperature range | Room temperature to 1250℃ |
| temperature resolution | 0.01℃ |
| temperature fluctuation | ±0.01℃ |
| heating rate | 0.1～100℃/min |
| range of balance | 0.01mg-5g |
| mass resolution | 0.01mg |
| DSC range | 0～±2000 mW |
| DSC sensitivity | 0.001 mW |
| constant temperature time | 0-500 minutes (set as needed) |
| cooling-off period | 30min（1000℃…100℃） |
| toggle rate | 16.6Hz |
| sampling rate | 0.05～10Hz programmable |
| Sensor type | The S-type, K-type, and E-type are interchangeable (S-type as standard, K-type and E-type optional). |
| experimental model | FTC and STC modes are configurable |
| Experiment type | weight loss, weight gain (adsorption) |
| programmed temperature control | 12-stage temperature control with flexible settings for all stages |
| temperature control mode | heat up, heat hold, cool down |
| Scan count | The scanning limit can be set up to 9999 times, and data is saved automatically. |
| instrument calibration | Both the lower and upper computer have the function of multi-point temperature correction |
| display mode | 24-bit color 7-inch LCD touch screen display |
| atmosphere control | You can freely set the two-channel atmosphere, and the instrument automatically switches between them. |
| Parameter standard | Standard materials are provided for users to adjust temperature independently |
| source | AC220V/50Hz (customizable to AC110V) |
| content | Quantity (units) |
|---|---|
| STA-1250S host | 1 unit |
| power line | 1 |
| The experimental software is stored on a USB drive. | 1 |
| data wire | 1 |
| crucible | 100 |
| water pump | 2 |
| pump coupling | 2 |
| multi function wrench | 1 |
| tweezers | 1 |
| fuse | 5 |
| PU air tube | 2 |
| silica gel water pipe | 4 |
| sample spoon | 1 |
| sample pressure rod | 1 |
| gas pope joint | 2 |
| PTFE TAPE | Volume 1 |
| ear-blowing ball | 1 |
| Certificate of Conformity, Warranty Card, Instruction Manual | 1 copy |
