Application

1. Surface water

2. Polluted water

3. Stormwater monitoring

Characteristic

1. One 10-liter bottle, mainly for mix sampling

2. High capacity lithium batteries

3. Large flow peristaltic pump and easy to carry.

Summary

Automatic water sampler is a used for surface water and sewage sampling, water monitoring, pollution source investigation and total amount control. It has a large flow peristaltic pump and control by SCM which is complies with international standards. It can works with standard 12V batteries and can be replaced by automobile batteries when the power is running out. The sampling process can be stored after install a flow meter. Obliterated data will not happened when the battery is exhausted.

Technical Data

Sampler

Height: 22.44 in (57.0 cm)

Diameter: 17.32 in (45 cm)

Weight (dry): 48.50 lbs (22.0 kg) 

Power Required: 12 VDC

Mean Time Between Failure: ≥3000h

Air tightness: ≤-0.05MPa

Operating Temperature: -5 ° to 50 °C

Ingress Protection: IP65 (Water projected against enclosure from any direction have no harmful effects)

1 0 liter round polyethylene bottle inside

2.8 inch TFT Color LCD Display screen

Pump

Suction Tubing: silicone (Inside dimension: 10mm)

Maximum sample lift: 26.24 ft (8.0m)

Precision: ±5 ml

Accuracy: ±5%

Software

Sampling Modes: Time or flow. (Flow mode is controlled by external flow meter pulses.)

Sample Frequency Selection: 1 minute to 9,999 minutes, in 1 minute increments.

 1 to 9,999 flow pulses(Output Pulse :5V~15V Positive Pulse)

Programmable Sample Volumes: 50 to 9,999 ml , in 1 ml increments

Storage capabilities: Sampling time recordable

Program Storage: 10 programs

Flow storage( external flow meter pulses)

communication interface: R232